Know How To Recover Data From Unbootable Hard Drive

Summary:

One of the reasons you were unable able to access your data is because the hard drive you are trying to access has become unbootable. That means, the hard drive cannot load the OS on it and hence the data from the unbootable hard drive becomes inaccessible. In this article, you will be able to understand how to access data manually and recover data from unbootable hard drive.

How to recover unbootable hard drive

Booting is an initial process that starts the operating system of a computer when it is turned on. Hence, if your computer won’t boot you cannot access any of the data present in the drive. In such situations, you might end up thinking how to recover files from a hard drive that won’t boot? Worry not! It is still possible to recover data from the unbootable hard drive.

To know furthermore on recovering data from an unbootable drive, let us start with the reasons that lead to hard drive not to boot:

Why won’t my hard drive boot up?

Some of the reasons that cause booting issues in the hard drive are listed below:

  • Installing a dual operating system on a single hard drive
  • Presence of an excessive number of bad sectors on the disk
  • Hardware failure due to faulty RAM
  • BIOS corruption due to the improper updating process
  • Operating system malfunction
  • Damaged partition table

The above-mentioned are some of the reasons that create booting problems on the computer. As a result, you will end up losing access to your important data stored on the hard drive.

Is it possible to recover data from an unbootable hard drive?

Yes, the easiest method to recover data from the unbootable drive is to make use of an efficient recovery tool. Download the SFWare Hard Drive Recovery software now and get back access to your important files and folders present on the drive.

Irrespective of the file types you want to recover, the SFWare hard drive recovery tool helps you in restoring all the data from the unbootable hard drive. Not only unbootable, be it a system crash or corrupt / damaged the SFWare tool helps in recovering data from the drive. The tool works on read only mode, hence the data on the drive is safe from any rewriting.

Free Download for WindowsFree Download for Mac

Another method, a manual method to access unbootable hard drive data is to make use of the secondary drive i.e., an external hard drive. Follow the steps given below carefully and try to access data from the unbootable drive.

How to Access Data from an Unbootable Hard Drive?

Follow the steps mentioned below to recover data easily from the hard drive that won’t boot. 

To recover data from unbootable hard drive, all you need is an External Hard Disk Enclosure. They are available in 3.5-inch (standard desktop) or 2.5-inch (Laptop) sizes. Make sure you pick the proper internal interface—IDE/ATA or SATA, based on the type of drive you are using.

Now you just have to follow these steps and you can manually recover files from unbootable hard disk.

  • Switch off the computer power, remove the battery and unplug your laptop or computer from the power outlet.
  • Locate the hard drive that fails to boot and disconnect the hard drive cables, unscrew it and pull it out of the case.
  • Insert the hard drive into an external hard drive case and connect it to a new PC, or insert the drive into another computer which is running in good condition.
  • Reboot the new computer from its standard OS on the main drive and then you can try accessing the hard drive data there.
  • Finally, copy files and get the data from the hard drive that won’t boot to a new storage device.

Sometimes, hard drive couldn’t boot up sue to damage in the partition table. If you are finding trouble regarding a partition table, click on the given link to fix and recover data from the damaged partition table.

By following the above-mentioned steps, you will be able to recover data from the unbootable hard drive. Meanwhile, the process takes much of your time and is a tedious process for the novice user.

You might face a number of difficulties from choosing a proper cable to connect to boot the new computer with the hard drive. in some cases, data may get formatted or deleted due to some unknown reasons, In such scenarios, How to recover formatted or re-formatted data from the drive? How would you recover files from a hard drive that won’t boot?

Recover Data from Hard Drive That Won’t Boot using SFWare

Initially to recover data from the unbootable hard drive, download the SFWare Hard Drive Recovery tool on your system and launch it. Connect the hard drive that won’t boot to the new computer.

1. From the main screen, select – Drive/Partition Recovery option

Recover NTFS Partition
2. Choose the hard drive that won’t boot from the list and select “Next” to initiate the scanning process

Select the NTFS Drive

3. The software starts scanning the unbootable hard drive. Scanning and recovering files from an unbootable hard drive is time-based and depends on the amount of the data or partitions to be recovered from the hard drive

4. Once it is completed you can see your recovered files from unbootable hard drive on the screen

View Recoverable Files from NTFS drive

5. To make sure whether the files are recovered properly or not, double click on the recovered files to preview

If you’re happy and willing to save recovered results, then get the license activated and get access to the Save button.

What to Do When Windows Won’t Boot?

Here are a few steps to follow when Windows refuses boot:

1.      Verify if anything has changed on your PC. Check if any new hardware driver is installed, or any new hardware component is connected to your computer. Because, If the hardware driver is buggy and the new hardware is incompatible, you might encounter the Windows won’t boot issues.

2.      Check the power supply. Sometimes, issues with the batteries could lead to inability to boot the PC. Check the fuse inside the power supply unit. If you find any problem with the power supply, remove it from your PC, and then remove the metal case to check the fuse.

3.      Check for any Windows error. Errors such as operating system not found or appearance of black screen/ blue screen while Windows starting might be a problem.

Why choose SFWare hard drive recovery tool?

  • The tool supports recovery of data from corrupt hard drive, formatted or damaged hard drive partitions from any HDD’s, SSD’s, USB and any external storage device.
  • Supports recovery of more than 300 file types including documents, images, videos, audio and etc
  • With the SFWare tool, the recovery of different file systems like NTFS and FAT file systems is also easy and simple.  
  • Recovers data from the bad sectored drive. Also, It supports data recovery from SATA, SCSI and IDE interfaces.
  • Restores data from all the brands of hard drives like WD, Samsung, SanDisk, Toshiba, Seagate, etc.
  • The tool is available for both Windows and Mac computers including the new Catalina OS.
Conclusion:

Recovering data from an unbootable hard drive is made simple with the SFWare recovery tool. Irrespective of the reasons leading to hard drive not to boot, you can still recover the files. It is always rewarding to keep the backup of the data to avoid any data loss conditions. 

Know How to Fix MOV No Sound Problem in Windows and Mac

Summary:

Most commonly, HD videos or 4k resolution videos recordings are saved in MOV file format. It can get quite disheartening when your favorite recordings play without any sound. In this article, you shall understand everything about no sound in MOV videos. Know why you would encounter no sound MOV problem and how to fix MOV Files with no sound issues in both Windows and Mac systems.

HD videos generally recorded on iPhone or digital cameras are saved in MOV file format. It can get quite disheartening when your favorite recordings play without any sound. In the following sections, you shall understand why you encounter no sound MOV files and how to fix MOV Files with no sound issues in both Windows and Mac systems.

A MOV file is a simple multimedia container file format developed by Apple and compatible with both Macintosh and Windows platforms. It contains various tracks that store several types of media data and is frequently used for saving movies and other video files.

In order to play a MOV file, an application should be able to recognize the specific codec present in the file. If an application is unable to read the codec, it displays a read error that leads to MOV no sound error.

Reasons behind MOV file no sound problem

The sound on MOV file can stop playing for various reasons, but in most cases, the reason might be as simple as the particular program’s incompatibility with the QuickTime file type. MOV files are QuickTime-based files, so trying to play MOV files on Windows might often lead to error MOV no sound.

Other causes such as unmatched codec in the file system library, system setting problem and video file corruptions also lead to no sound in MOV files and QuickTime 2048 error.

If you are wondering, is it possible to fix no sound problems on MOV file? It is definitely possible to fix the MOV files playing without audio. The next section of the article guides you on how to fix the error and make MOV files play again.

Quick Fix to Check MOV NO Sound Problem

1) Verify the speakers of your system. Also, make sure you have updated and the latest sound drivers to play media files. Try to play MOV files on different media players and verify the audio output.

2) Make sure that your system volume is not muted or set too low. To adjust your system volume levels, access the speaker icon on your computer’s taskbar or Mac’s dock.

3) Verify the sound card for device conflicts or update your sound card drivers.

After performing the above-mentioned verification process, try playing your MOV files. If the error still persists on the MOV file, try resolving the error using the methods given in the next section.

How to fix MOV no sound error?

You can try out the below-given methods to fix the MOV file no sound issue:

Method 1: Fix MOV no sound using VLC media player for Windows

Method 2: Fix MOV no sound on Mac by Resetting of PRAM (Parameter Random-Access Memory)

Method 3: Use proficient MOV file repair Tool (Windows & Mac)

Windows: Fix no sound MOV file using VLC media player
VLC Player to fix MOV no sound
Step 1. Download and install VLC Player on your Mac. Launch it and go to the Media menu, select Convert or Save.
VLC-convert-Save
Step 2. Drag and drop the damaged MOV files to it and click Convert or Save.
Step 3. Next window, give a new name for the destination file video.
Add the MOV fileStep 4: Next, select the Input Codec from the profile list and click Edit Selected Profile. Here, you can also edit the settings.

Step 5: Click Start

The VLC media player can only figure out the right codec to flawlessly play the MOV file with sound. Meanwhile, as VLC tries to embed a feasible codec in MOV file, it alters the file structure that may lead to further damage to the file. To know why your VLC not working, click on the given link.

MacOS: Fix MOV File no sound by resetting PRAM (Parameter Random-Access Memory)

Simply by resetting PRAM, various sound-related issues can be resolved.  You can also fix MOV file no sound Mac issues by installing an updated version of Mac OS X.

Step 1: Turn off your Mac if it is currently used
Step 2: Power on the Mac and immediately press ⌘command+option+P+R – hold these keys until Mac restarts.
Step 3: Release keys when you hear the startup sound again
Step 4: Test to see if you can hear the sound again and if you can adjust the volume.

Note: Resetting the PRAM in Mac can only fix sound related issues due to improper Mac settings.

If these methods didn’t work out, then the video file might be damaged. Moreover, if you are experiencing no sound issue with only one MOV file, then it means that the MOV file is corrupted. In such cases, it is highly recommended to use a professional video repair tool that fixes the error no sound in MOV files in three simple steps.

SFWare Repair MOV file is an automated tool designed to work with all types of MOV errors. It works by analyzing the audio and video streams separately to identify any audio & video issues. It easily fixes no sound problem in MOV files and adjoins the audio & video streams to generate the healthy playable MOV file.

Free Download for WindowsFree Download for Mac

How to Fix No Sound Problem in MOV files? (ALL Windows & Mac versions)

To fix no sound in MOV files, download and Install SFWare MOV File Repair Software on your system (Windows / Mac)

Mov File Repair

Step 1: From the main screen, select MOV/MP4 Repair option. Provide any healthy working MOV video file and a corrupt file that you want to repair. Click on Repair

healthy and corrupt fileStep 2: After the completion of the repairing process, click on the Preview option to view a repaired file.

file previewStep 3: If you are satisfied with the results, Save the repaired video in any desired location on the computer.

About SFWare repair MOV file tool:

Remo Repair MOV is a read-only program thus, it never damages your original file during the repair process

This utility can even fix your large and severely corrupted MOV, MP4 files that refuse to play on any media players and leads to a choppy video. Click here to Know-How to Fix Choppy Video File

It supports all Windows and Mac OS versions including the latest Catalina and macOS High Sierra, Sierra, El Capitan, etc.

 

How to Fix USB Device Not Recognized Error on Windows

Summary:

If the error message “USB drive that is not recognized keeps popping up on your Windows, you will be unable to access any data from it. You can stop the error message popping up using the following solutions explained in this article. The article not only guide you to fix the problem USB not recognized but also helps you recover data from the USB drive that is not showing up or recognized by the computer. 

When you are trying to access data on an external USB hard drive, you may receive the following error:

USB device is not recognizedUSB Device not recognized: One of the devices attached to this computer has malfunctioned and windows does not recognize it.

Why Windows Fails to Recognize the USB Device?

Here are a few common reasons listed below that makes USB unrecognizable by Windows.

Hardware Errors: Any damage to the USB device can cause data loss It is recommended to recover data from unrecognized USB drive.
Faulty Drivers:  Corrupt USB driver, controller or problem with PC motherboard could be the reason behind USB drive not recognized. Uninstall USB device and reinstall

Reinstall the USB controllers

Install your motherboard’s latest chip set drivers

Configuration Issues: Misconfiguration of OS and devices also leads to the USB error Run USB Trouble shooter

Repair the Windows system

Connection Issue: Problem in the cables or the USB port makes Windows not detect the USB. Try different Port to connect USB device to your PC

Disable USB selective suspend setting

System Errors/ Corruption: This could be due to virus or system file corruptions. Update the Windows OS

Note: The above-mentioned methods to fix the error USB not recognized do not completely guarantee to secure your data in the drive. It certainly helps in fixing the error if it is related to the particular issue, say problem in the system driver or Windows updates etc. To secure your data, it is recommended make use of the reliable USB data recovery tool.

SFWare USB Recovery Software is a reliable data recovery tool that is integrated with a prevailing algorithm to identify and scan different file types. The tool helps you recover data from USB drives that are not recognized. All you have to is download and install the software on your computer and then follow the simple on-screen instructions. And you are done!

Free Download for WindowsFree Download for Mac

How to Recover USB Data from Unrecognized Drive?

Download and install the SFWare USB Data Recovery Software and follow the steps given below:
Step 1: Launch the application, main screen displays “Recover files” and “Recover Formatted/Corrupt” options. Select any of the preferred option and go to next.

USB data recovery home screen
Step 2: Select the drive to recover files from USB drive. Click on “Next” option

Select USB Drive
Step 3: Software scans drive and displays the recovered partition data. Double click and preview the recovered data and validate them.

Save Recovered Files
Step 4: If data is appropriate and willing to save the results, then get the licensed activated and get the access to Save button

End Screen

How do I Fix the Error USB Device Not Recognized?

Follow the below given methods to fix the USB not recognized or detected. Verify if you are still encountering the error after performing each method and move to next one.

Method 1: Uninstall USB driver and then reconnect the USB device

This method resolves issues where the loaded USB driver has become unstable or corrupt.

Device Manager-uninstall the drivers

1. Go to This PC and right click on it
2. Click on Manage > Device Manager > double-click Disk Drives
3. Right-click on the name of your USB external drive. Click Uninstall
4. Disconnect your USB cable and restart your PC
5. Reconnect your USB cable, the driver should automatically load.

Remember: Plug USB directly into your computer. Connecting your USB external hard drive into a non-powered USB hub can cause a lack of enough power to operate the external drive. If this method does not resolve your issue, proceed to Method 2

Method 2: Re-installation of USB controllers

This method resolves steps where the currently loaded USB driver has become unstable or corrupted.

Device-Manager-Universal serial bus controllers

1. Select Start, type device manager in the Search box and then select Device Manager.
2. Expand Universal Serial Bus controllers. Right click on a device and select Uninstall. Repeat for each device.
3. Once complete, restart your computer. Your USB controllers will automatically install.

If your problem still exists, proceed to Method 3.

Method 3: Install your motherboard’s latest chip set drivers

This method updates your motherboard’s chip set drivers, so your computer will recognize your USB external hard drive.

  1. Check for the name of the motherboard manufacturer on your computer’s documentation.
  2. Go to your computer manufacturer’s support website. See Computer manufacturers’ contact information.
  3. Navigate their website to find the appropriate drivers for your motherboard. For assistance, contact your computer manufacturer.

If your problem still exists, proceed to Method 4.

Method 4: Run USB Trouble shooter

If the problem is with the configuration of USB device, this method will surely help you in fixing the problem USB device is not recognized.

  1. Go to this PC >> Right click on your USB device drive
  2. Select Properties >> Tools tab >> Check under Error checking
  3. This selects the drive and scans for errors and repairs

Method 5: Repair your Windows System

If the problem is with Windows OS, it is important to repair the OS corruption. You can repair OS corruption using Windows terminal.

Run SFC to fix the drive

  1. Press Win + X and launch Windows Terminal or Windows PowerShell
  2. Enter the following command to scan the integrity of all protected operating system files: sfc /
  3. Once scanning is completed, restart your computer and verify if you still encountering the error USB not recognized.

Method 6: Try different Ports When USB not recognized

One of the easiest ways is to connect your USB device directly to your computer, if you are using any USB Hubs. Remove the USB from the HUB and restart your computer. Once your computer reboots into the Windows system, re-connect your USB device to your computer directly through the built-in USB port. But if the error keeps still popping, proceed to try the following solutions.

Method 7: Disable USB selective suspend setting

This method prevents your USB external drive from powering down.

1. Select Start, type power plan in the search box and then select Choose a power plan.
2. Select Change Plan Settings and choose Change advanced power settings.
3. Select the box to expand USB Settings > USB selective suspend settings.
4. Select Plugged in, select the drop-down menu, and then select Disable.
5. If you’re using a laptop, first select battery, select the drop-down menu and then select disabled.
6. Select Apply > OK.

Method 8: Install the latest Windows Updates

This method will install the latest device drivers for your USB external hard drive.

1. Search Check for Updates in search box. Select Install updates available.
2. Follow the on-screen instructions to download and install the updates.
3. If indicated, reboot your computer.

Conclusion:

USB device not recognized” This is a common error that occurs with USB devices. According to users, they are completely unable to read their files stored on the USB. Sometimes USB problems can stop you from transferring files. Perform the solutions that are described in the article if any of the solutions did not help you, make use of SFWare USB Data Recovery Software which is a secure USB drive recovery tool. It is implemented with a powerful algorithm to identify and recover different file types. It resolves any External device-related issues without making the things go complicated.

How to Fix CRC Error in Outlook PST?

Summary:

If any interruption is caused while using Outlook, your data file might be prone to CRC error. And no longer data can be used. Follow the below sections to know about the easiest solution to fix the data cyclic redundancy check (CRC) error in Outlook. Before that, learn about causes of cyclic redundancy check error below.

MS Outlook is a largely used email client software that is developed by Microsoft. Apart from being just an email application it also offers multiple functionalities in the form of a contact manager, note-taking, journal, calendar, etc.

While offering different features, Outlook is also prone to corruption for various reasons that leads to “Data Error (CRC)”.

Causes of cyclic redundancy check error in Outlook PST:

  • Abrupt termination of Outlook application
  • Incomplete download of MS Outlook emails
  • PST File Size Issue can lead to cyclic redundancy check error in Outlook
  • Malware infection

There are plenty of errors that affect Outlook email client on a daily basis. Problem with Outlook can directly affect your work routine. Firstly, to fix the data CRC errors try out these few simple methods as indicated in the coming sections.

What is Data Cyclic Redundancy Check Error?

Basically, CRC is an error-detecting code that is commonly used to detect accidental changes to raw data in digital network and storage devices. It is called CRC (cyclic redundancy check) because the algorithm used to check error is cyclic codes. It majorly helps in indicating any errors in the PST file during read and write operations.

There exist two manual methods to fix CRC error in Outlook. One is using chkdsk command in the command prompt and another is scanpst.exe (inbox repair tool). Inbox repair tool is an inbuilt service provided by the Microsoft company to repair OST and PST files.

Is it possible to fix data cyclic redundancy check error in Outlook?

Yes, there exist two methods to fix CRC error in Outlook. You can try using CHKDSK command in the command prompt to fix CRC error and the other is scanpst.exe (Inbox repair tool). Inbox repair tool is an inbuilt service provided by the Microsoft company to repair OST and PST files.

Above mentioned both methods works when there is minor corruption, if your Data file is severely corrupted, you might need a professional Outlook Repair tool to Fix CRC error.

Method 1: Fixing data CRC error in Outlook with chkdsk command

A command prompt (cmd) is a command-line interpreter that is available in most of the Windows operating systems. It’s a program that helps a long way in fixing the CRC error using the following sequence of commands.

  • Step 1: Go to search bar and type cmd. Run the application
  • Step 2: Type “chkdsk disk name: /f” and press enter. Disk name refers to the disk that is chosen to run for scanning. In case error “Access Denied as you do not have sufficient privileges. You have to invoke the utility running in an elevated mode” occurs
  • Step 3: Go to the initial step and click on “Run as Administrator”.
  • Step 4: Type “chkdsk disk name: /f” and press enter.
  • Step 5: After completing close chkdsk and restart the computer.

Usually, these steps won’t resolve errors completely. Since, it requires a high knowledge of command-line execution, a single line error in execution leads to the complicated run in command prompt.

If the problem continues, storage drive has to be formatted. Formatting will erase all the data from the storage device. If you don’t want to lose any data, it is safe to use SFWare PST Repair tool, which is more effective and an optimum way to repair PST files.

Free Download for Windows

Method 2: Fixing data CRC error in Outlook with scanpst.exe tool

It is an inbuilt utility provided by the Microsoft to fix data cyclic redundancy check error in Outlook PST and repair files-Microsoft Outlook Inbox Repair tool. It works by scanning each object folder by folder and checks for data integrity issues. Furthermore, where scan-PST is located and how does it help with fixing data CRC error is given below.

Where is scanpst.exe located? – simple steps to locate the inbox repair utility
  • Open task manager on Windows PC
  • Then, go to the process tab
  • Right-click on Outlook and select “Open File Location”.
  • Option to convert data without Outlook installation.
  • Now the Inbox repair tool is located in this folder by the name “scanpst.exe”.

Or manually locate scanPST.exe.

Following are the instructions for using the Microsoft Inbox utility to fix OST and PST files:
  • Step 1: Close the Outlook application if its currently open. Next, double-click on the application to launch it.
    Inbox repair tool
  • Step 2: Click on the Browse button to go to the folder path where the PST file is saved.
  • Step 4: Then, click on Start to initiate the scanning process and repair Outlook data files (.PST and .OST).
  • Step 5: Now, each file and folder will be searched to find errors. These will be reported at the end of the process.
  • Step 6: Finally, click on the Repair button to Recover Microsoft Outlook data file.

Although Scanpst.exe is convenient and free, it might not be capable of repairing the severely broken PST file. Scanpst.exe starts working directly on the original file and alters the content While SFWare utility does a copy of original file and allow changes, SFWare PST Repair tool helps retaining data integrity as well as helps in scanning and minimize the data corruption without any hassle.Free Download for Windows

How to fix data cyclic redundancy check error in Outlook?

SFWare Repair Outlook (PST) tool has a programmed process to repair fix PST files.

Download SFWare Repair PST tool and install in the system. Launch the software.

    • Step 1: The main screen displays three options, select one as per the need:
      • Open Default PST File
      • Select PST File Manually
      • Find All your PST Filespst repair tool
    • Step 2: Next screen displays two different scanning options – Normal Scan and Smart Scan. Scanning process depends on the requirements given. Provide the destination path to save repaired PST file.Select PST File
    • Step 3: Then click on Repair option to start the repairing process
    • Step 4: Once the process gets over, preview all the recovered Outlook Items to evaluate fixing of data error CRC in PST filesEnd Screen

    Conclusion:

    There are certain reasons for which Outlook PST file cannot be accessed, one foremost cause is data cyclic redundancy check error. However, after going through this article you will be able to fix the errors in a simple manner using SFWare repair tool.

    Frequently Askes Question

What is Data Cyclic Redundancy Check Error in outlook?

Cyclic Redundancy Check is a Data error that is encountered when you are trying to download new email on to your computer. Sometimes, this can be due to corrupt Outlook data files or change in the stored PST file location.

Can Data Cyclic Redundancy Check Error in outlook using CHKDSK?

Yes, you can try using CHKDSK command in the command prompt to fix CRC error in Outlook. you can follow the detailed steps to use CHKDSK in article. The other method you can try using to fix the CRC error in Outlook is ScanPST or inbox repair tool.

Deleted Partition Recovery: How to Recover Data from Deleted Partition?

Summary:

Partitioning of a hard disk is always a good practice. Partitions allow you to logically classify your files or data according to your preferences. These partitions can be lost or deleted due to damage or accidents. As mentioned below a few recommended ways can definitely be used to restore a lost or deleted partition.

This article will give you a brief insight on how to restore a deleted partition and retrieve data from a deleted partition.

Quick Navigation:

  1. Why Partition get deleted?
  2. Is It Possible to Recover Deleted Partition?
  3. How to Recover Deleted Partition?
  4. How to Recover Data From The Deleted Partition

Reasons Behind Deleted Partition

A deleted partition is challenging to restore. However, if you know what caused the current situation, you can prevent them from happening in future. Few reasons that result in a deleted partition is as follows.

1) Accidental Deletion:

It is quite common when users accidentally deleted a partition. However, it is not a dead end and you can confidently recover your deleted partition by following the instructions in this guide.

2) Wear and tear of a hard drive:

Hard drives or any sort of storage device are subjected to wear and tear just like any physical device. Overused drives might have storage sectors altered on the magnetic disk and delete the partition.

In more technical terms, bad sectors form due to wear and tear of the drive and if these bad sectors have the organizational data of the partition, your partition will be lost.

3) Corrupt PBR:

Partition Boot Record or PBR contains information about the contents of that partition. It helps the operating system to find and launch the files or applications existing on that drive. There are numerous reasons that crash a PBR. With PBR crash, your OS can no longer access the partition, or recognizes the existing partition.

 However, recovering a deleted partition and accessing data from inaccessible partitions is possible but only with proper instructions. In the later section of this article a clear explanation of how to recover deleted partitions manually can be found.

Can I Recover a Deleted Partition?

Most of you might think that once partition is lost or deleted, it’s gone forever and the data present in the partition can never be recovered.  Fortunately, you can recover a deleted partition using manual procedures. Therefore, to recover data from a deleted partition you need a professional partition recovery tool.

Free Download for WindowsFree Download for Mac

SFWare Partition Recovery Tool is the most recommended tool to recover data from the deleted partition. If you are wondering how SFWare recovers your files from the deleted partition here is the answer.

The Partition always gets recognized by computer with its partition table and boot sector. When you delete a partition on the computer, the system just removes partition information such as partition type, size and location of the file stored, file system, etc from the partition table rather than wiping complete data. Therefore, the partition becomes unrecognized in Disk Management or File Explorer.

For Mac Users: If you have accidentally deleted the Mac HD, click on the given link to recover data from the deleted or erased Mac HD.

How Can I Recover Deleted Partitions for Free?

You can use disk part command through command prompt to clean the partition and recover it.

Steps To Perform Deleted Partition Recovery Using CMD:

Deleted Partition Recovery

  1.         Click on start search cmd  -> right click on it and run as administrator
  2.         On the command prompt window type diskpart
  3.         Type list disk and enter, now you can see disks on the computer ( If you type listdisk, commands with explanation is displayed)
  4.         Type Select disk # (replace # with the drive that contains lost or deleted partition)
  5.         Type list volume and press enter
  6.         This will list out available volumes or partitions on the disk
  7.         Now type select volume # (replace # with lost volume number) and press enter
  8.         Finally type assign letter = # (replace # with available drive letter)
  9.         Close the command prompt

NOTE: Once you successfully recover deleted partition, do not make use of the partition to store any new data until you have recovered data. Because doing so will overwrite recoverable files and cause permanent data loss.

However, remember that you only restored the partition but not the lost data on the deleted partition. For recovering data from a deleted partition, you need a tool specifically programmed for the task.

SFWare Partition Recovery tool is developed by testing against thousands of real-time data loss scenarios. It is integrated with robust scanning algorithms that ensure to recover data from lost or deleted partitions without any hassle. 

Be it NTFS, ExFat, FAT or RAW file system on drive recovering data is now a walk in the park. The tool supports recovery from all versions of Windows operating systems including Windows 10 and latest Mac OS. Download the software now and try it for free…

How to Recover Data from Deleted Partition (Windows & Mac)?

Free Download for WindowsFree Download for Mac

To recover data from the deleted partition, download and install SFWare Partition Recovery software and launch the application, you will see Drive/Partition recovery button and Formatted Recovery buttons.

1. Click on the Partition recovery button. It will list all the available hard disks and partitions on the computer

Restore Deleted Partition

2. Click on the drive from which you need to recover data.

Scan drive to recover files from deleted partition

3. It starts the scanning process. Once scanning is completed, it will list out the available files or data on the partition

4. At this stage, you can have a preview of the data available and check the integrity of the files

Recover partition data without any hassle5

5. Select data or files which you want to recover and click Next. Now give the location where you want to save the recovered files from lost or deleted partitions.

With the help of the software you can recover data from the drive showing no file system and extended partition too.  

Benefits of Using SFWare Partition Recovery software:

SFWare is a robust data recovery software. It is not limited recovering deleted or lost partitions, you can also

  • Recover formatted or reformatted partitions
  • Interactive GUI is designed to make the recovery process easy even for a newbie
  • A professionally programmed algorithm can perform a sector level deep scan
  • It is compatible with all kinds of hard drives (HDD’s, SSD, SDcards, Pendrives etc)
  • Supports all types of file systems (NTFS-5, NTFS, FAT-32, exFAT)
  • Most importantly it can work on all versions of Windows operating systems (XP, 2000, 2003, 7, 8, 10)

[2022]How to Recover Photos from Corrupt SD Card?

Summary:

Losing photos from SD card due to corruption could be stressful. If you are worried about how to recover photos or videos from corrupt SD card, you are on the right page. This article explains on how to to fix SD card corruption and recover photos from SD card without any hassle.

Quick navigation:

  1. Reasons for Data Loss from Corrupt SD card
  2. Fix Corrupt SD Card
  3. Recover Photos from Corrupt SD Card

Common Reasons for Data Loss from Corrupt SD card

A few obvious reasons behind the corruption of SD card or cause data loss on SD card as follows

Inaccessible SD card:
Under rare circumstances, the file system on your SD card might get corrupted or converted into a RAW drive. A RAW file system error occurs when a computer cannot access the storage device or recognize file system. Fortunately in situation like these, your photos are still saved on your SD card but you cannot access them.

Note: If your files SD card is inaccessible, skip ahead to section of the article that explains how to recover photos from SD card

Unexpected formatting of SD card:
Various digital cameras use a distinct storage media format to save photos. When you insert your SD card from one camera into another it will format the card with its own specific file system.

Recovering formatted data from SD card using CMD is complicated for a normal user, rather it is quite easier to recover lost photos, videos or any other using an SD card recovery software.

Virus or Malware attacks:
If your SD card is infected with viruses or malware, a swift reaction is required to save your personal memories from corruption. Virus attacks are always sneaky, so it is recommended to maintain an updated firewall or antivirus for avoiding such situations.

Interrupting While Reading or Writing on to SD card:
Most of the users tend to take SD cards for granted. Users interrupt any read or write process or remove SD card from camera without switching off. Under such circumstances, the SD card’s file system will be damaged resulting in corrupt or damaged SD card.

Nevertheless, you can surely repair Corrupt SD card using various approaches. One of the best suited method to fix corruption on SD card is using command Prompt.

How to Repair Corrupt or Damaged SD Card using CMD?

The quickest way to recover corrupt or damaged SD card is through CMD. CMD or Command window is a ms-dos tool. Follow the specified instructions to recover photos from sd card

  • Click on start search cmd. Right click on cmd and click on Run as Administrator
  • On the command window type chkdsk “drive letter”/f (for example if a drive letter is G: type chkdsk G:/f)
  • Once this process is finished enter command “drive letter”: (“C:” press enter)
  • Enter command attrib -h -r -s /s /d *.*CHKDSK to repair corrupt SD card and Recover Data
  • Once the process is completed you can see the recovered files in a new folder in the SD card. However, manual way of repairing a corrupt SD card might be risky as well as tricky. If you are not confident, kindly refrain from repairing damaged SD card using CMD. Because a single mistake while using cmd will permanently erase all your precious photos.

SFWare SD Card recovery software developed with an easy user interface, that automates the recovery process and avoids any data loss scenarios. SFWare’s deep scan algorithm is specifically programmed to recover lost photos from corrupt, formatted or damaged SD cards.

Free Download for WindowsFree Download for Mac

How to Recover photos from corrupt SD card ?:

SFWare’s SD card recovery software is specially programmed to recover digital media from problematic SD Cards.

  • Download and install SFWare SD card recovery software
  • Connect the corrupt SD card to your computer and launch SFWare recovery software
    SFWare Recover photos home page
  • Select Recover Formatted/Corrupt for recovering files from corrupted SD card
    SFWare Recover photos from Corrupt SD Card
  • Now click on scan. Scan result will display available storage devices and partitions on your computer
  • Select the storage device you want to recover and click Scan
    SFWare Recover photos from Corrupt SD Card
  • Once the scan is completed, you can see available partitions on the scanned storage device
  • Select the partition consisting your photos and click on scan
  •  After a successful scan, you can recover the photos on the partitions.
    SFWare Recover photos from Corrupt SD Card
  • Select the files you want to restore and proceed to save the files
    SFWare Recover photos from Corrupt SD Card

    Why choose SFWare SD card Recovery software?

  • SFWare SD card recovery is specifically designed to recover digital media such as RAW images, PSD files, video files, MP3 formats etc
  • Integrated with a robust scan algorithm, it always ensures to give you precise scan results
  • With the help of SFWare, you can easily recover deleted files, files from reformatted or hard drives installed with the new operating system.
  • You can take advantage of save recovery session and avoid rescanning of large hard drives
  • It is compatible with storage devices formatted with NTFS-5, NTFS, FAT32, exFAT, HFS, HFS+Conclusion:
    Hope this article helped you to recover photos from corrupt SD card. As discussed in this article, SD cards are vulnerable. There might be various reasons for corruption. Nevertheless, you can recover them easily. However, the manual way of recovering photos is risky and tricky. Hence, it is strongly suggested to use a professional photo recovery software to automate and avoid any risk of erasing precious photos.

Frequently Asked Questions

What causes an SD card to become corrupt?

Physical damages, file system corruption, bad sectors on SD card, improper handling of SD card, interruption during formatting an SD card, virus or malware infection on SD cards can cause damage to SD cards and leads to SD card corruption.

How do I uncorrupt an SD card?

The best way to fix corruption on SD card is using CHKDSK command in command prompt. All you must do is, run the command CHKDSK C: /f and attrib -h -r -s /s /d *.* as explained in the steps above.

Is there a way to recover data from a corrupted SD card?

Yes, you can recover photos/files from corrupt SD card with the help of safe and secure data recovery tool. As manual methods cannot be used on SD card recovery, you can make use of SFWare SD card recovery tool to recover photos/videos from SD card.

How to Remove Shortcut Virus from Pen Drive & Access Data?

Summary:

Files turning into shortcuts are not uncommon. Every USB user faces this challenge quite often.  Here is the best solution for the most experienced troublesome problem. Follow the article to know why files turn into Shortcuts and how to recover files from USB or Pen drive turned shortcuts.

Free Download for WindowsFree Download for Mac

Table of contents:

Why Files Turn into Shortcuts?

What are Shortcut files?

When do files turn into Shortcuts?

How to Fix A Folder That Has Become A Shortcut?

How To Recover Data From USB  Showing Shortcut Folders?

Pro tips to keep your files safe

FAQ

About Files Turning into Shortcuts

A Pen drive or USB drive is the most commonly used external storage device. And this is the reason why these drives are most affected by virus. One of the common virus found in USB’s is the one that creates shortcut files.

In other words, shortcut files are the files created by Autorun.inf worm and Virus or Trojan.

These viruses hide all the files and folders present in drive and create a shortcut. These shortcuts keep appearing even after you delete them or you format the drive. And, formatting a drive will not assure you complete security over the virus. Therefore, you would risk losing important data if you rely solely on formatting. 

To get back original files, you have to fix the problem and recover files from USB turned shortcut using a proficient USB data recovery software.

Note: The shortcut virus doesn’t give any option but makes file inaccessible but when you click files in them or once the file is opened it would multiply itself and eventually occupies the entire drive until it is full.

The shortcut virus keeps appearing even after deleting it many times. You might have also used antivirus to get rid of the shortcut virus but the antivirus will not be able to recover the lost or deleted files. Data recovery software is needed to retrieve the lost data. Download the SFWare USB Data Recovery Software to recover data that has been lost because of the shortcut virus.

Free Download for WindowsFree Download for Mac

What is a Shortcut Virus?

As the name indicates, shortcut virus is a program that creates a shortcut of a particular file or folder and hides the original file present in the storage drive. This virus mainly affects external storage devices such as SD cards, USB drives, and other storage drives.

Types of shortcut virus:

1) Flash drive shortcut virus: It is a Trojan virus that enters the drive and hides. The virus then wraps all the folders and files in a shortcut that looks exactly like the drive. If the drive is clicked the virus will replicate it and eventually occupy all the storage space. This virus is capable of multiplying itself every time the folder or the file is opened.

2) Folders and file shortcut virus: The folder and file shortcut virus affect the Pen drive by hiding all the files and folder in it and creating a shortcut for the folders and files. The files and folder can only be accessed by clicking the shortcut virus; this action will initiate the duplication of the files and folders.

When do files turn into Shortcuts?

  1. The antivirus in the computer might have not recognized the Trojan virus because it was not updated
  2. Downloading content from the non trusted source on the internet can bring in a virus into the computer.
  3. If a virus affected Pen drive is used in a computer without scanning for any potential virus, virus would enter the USB drive from the PC

How To Fix A Folder That Has Become A Shortcut?

Before deleting shortcut virus it is important to fix the virus from the file, follow the below given steps:

Method 1: Show hidden files to recover files hidden by shortcut virus

Sometimes viruses may turn your files into hidden states. Therefore you need to unhide the files to make them visible.

  1. Insert your USB or Pen drive, go to My Computers
  2. Click View Tab and Check Mark Show Hidden Items option

 Or you can unhide the files or folders using the command line.

  1. Right-Click on Start and select Command Prompt run as administrator.
  2. Now type F: ( Where F is the drive letter)
  3. Now, type the following attrib -h -r -s /s /d F:\*. * (Replace F with the drive letter where you would like to show hidden files)
    Show the shortcut files

By doing this you will be able to unhide the hidden shortcut files. Now, go to the USB drive and verify whether all the hidden files are shown. If you can’t still find the files, try the best recovery method shown in the next section.

Method 2: Delete the Shortcut Files

Once hidden files are shown in the pen drive, delete the shortcut files using the command prompt.

Delete the Shortcut Virus files

  1.     Go to Start → Click on Run → Type cmd
  2.     Select your device by typing the assigned drive letter followed by a colon for Example- e: ( Where I is the drive letter)
  3.     Next, Type del *.lnk
  4.     Type attrib -h -r -s /s /d e:*.*
  5.     Hit Enter

Now, check whether your drive is free from shortcut files. if you can’t find your files in the drive, recover your files from USB drive or pen drive showing shortcuts using the below method.

How To Recover Data From USB Folders Turned Shortcuts?

Free Download for WindowsFree Download for Mac

Download SFWare USB recovery software and Launch the application. Connect your pen drive or USB drive to the computer.

  • Select Recover files option from the main screen
    SFWare to recover shortcut files
  • From the next screen, select the drive from which you need to retrieve your files.
    Select the drive to recover deleted files
  • After the completion of the scanning process, you can view files in either Data View or File Type View.
    View recoverable files from drive in Data View or File Type View
  • Right click on the file to preview the recovered and then save the file in any desired location on your PC.

Pro tips to keep your files safe

A virus can affect the computer and storage devices in many ways. These viruses can corrupt the Pen drive or permanently delete the data present in them. Once affected by the virus it becomes quite tricky to recover shortcut files from Pen drive. In order to avoid such situations in the future here are a few preventive measures to be followed.

  1. Always download files and applications from a trusted source
  2. Make sure you use antivirus in the computer and keep the antivirus updated
  3. Scan the Pen drive for antivirus before using it.
  4. Never use the Pen drive in computers that have high chances of being infected with viruses.

Frequently Asked Questions:

How can I get shortcut data from pen drive?

To get your data from shortcut folder in pen drive, you first need to remove shortcut virus from the drive. With the help of methods explained in the article, you will be able to fix the problem.

How can I remove shortcut virus from my USB?

You will be able to remove shortcut virus using attrib command and by deleting the shortcut files from the pen drive.

Why my pen drive files become shortcut?

Shortcut files are the files created by Autorun.inf worm and Virus or Trojan. When your files are affected by virus, it creates shortcuts of folder saved on the drive with 0 kb data.

How do I delete a shortcut folder?

With the help of commands in the command prompt, you can delete the shortcut files from pen drive. When you try to delete shortcut files using normal delete command, it reappears, therefore, make use of commands to delete the shortcut virus in pen drive.

How to Move OST File Location in Outlook?

Summary:

This write-up gives a broad view on how to change the file location of the Outlook OST file. Using the below mentioned manual techniques, you can safely move OST file in Outlook or change the location of OST file in Outlook.

Quick Navigation

When Outlook OST file location should be changed?
How can you Change OST file Location?
Move Outlook OST file location
Move Outlook OST file to another drive
Move Outlook OST file to new computer
Frequently Asked Questions

When should you change the location of OST file in Outlook?

It is quite easy to change the location of PST file that belongs to a POP3 account, however changing the location of the OST-file for an Exchange, Outlook.com or IMAP account might be trickier.

While it is recommended not to alter the default location OST-file, there are still some logical reasons for moving it to different locations, for example: limited storage in “C:” drive and the OST file requires more space. In this case, necessarily you have to change the location of the OST-file.

The default storage location of Outlook OST data files in Windows is on “C:” drive. If large amount of data is saved in your Outlook data file, it can only be restricted by the space of your system partition. Now, this post will show you how to change the data file location in Outlook 2016 for Windows.

How can you move OST file in Outlook ?

One of the reasons behind relocating an OST-file is degradation of the system performance. Huge Outlook data files can cause system to run slow. Based on the location you need to move OST file to, you can follow below mentioned methods:

Move Outlook OST file location using ForceOSTPath

Move Outlook OST file to another drive using Symbolic Link

Move Outlook OST file to new location

Method 1: Use the “ForceOSTPath” registry entry to change the location of the .ost file

Using the ForceOSTPath Registry value is a highly preferred method, but it involves the strenuous process of removing and adding your account along with re-downloading your mails all over again from the server.

Note: This method only works for a new Outlook profiles.

Step 1: Make sure that outlook is closed and OST files are not opened in any of the software or program

Step 2: Select Windows logo + R keys to open run box. Type “regedit” and click OK

Step 3: Next, navigate through the path HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook

Step 4: Next, right click on any blank space and then select New -> Expandable String Value.

Step 5:  Name the newly created expandable string value as ForceOSTPath.

Step 6: Double click on ForceOSTPath, On the” Edit String” dialog box, under the” Value data” box enter your desired path where you want to locate the OST-file and then click OK.

Step 7: Close the Registry editor and restart the outlook to see the modified location of OST-file.

Performing these steps will change the old/default location of Outlook data file (.ost) to the new specified location.

Caution: When making changes to registry, any wrong step can completely break or corrupt the Outlook program or sometimes even the system. If you encounter any trouble due to a corrupt Outlook data file, it is recommended to repair the OST file.

Method 2: Using Symbolic Links or Junction Points

A symbolic link, also called as a soft link, is a specific kind of file that points to another file, just like a shortcut in Windows. An object that is being pointed is called a target. Symbolic links are transparent to users; the links appear as normal files or directories.

You can use this method to move the Outlook OST-file to the new location.

In this case, a symbolic link is created for OST-file in its original location on the system drive(c:\drive) which points to the file present on the data drive.

Steps to create symbolic link are listed below assuming an example with the OST-file name as datafile.ost, and the location to where OST-file is shifted as D:\Documents\Outlook Files.

Step 1: Close outlook that is in use.

Step 2: The default location is; C:\Users\%username%\AppData\Local\Microsoft\Outlook, Move the OST-file or PST-file from its original location to its new location.

Step 3: Open Command prompt using Windows+R keys, Run as Administrator. Provide all the administrator credentials for your computer by selecting yes to allow the prompt.

Step 4: Type the following commands

mklink “C:\Users\%username%\AppData\Local\Microsoft\Outlook\ datafile.ost ” “D:\Documents\Outlook Files\ datafile.ost “

Where, mklink is used to create symbolic link;

Once the symbolic is created, it looks like a shortcut in the explorer. It holds the OST-extension and the “Outlook Data File” file type (Windows 7) or the “symlink” file type (Windows 10).

It is a bit tricky to use symbolic link to move Outlook OST-file because it should be executed in the command prompt. Any misspelled command in the prompt leads to consequences like Outlook data loss or corruption. It is suggested to use a software to repair OST, but you never be able to find a suitable repairing tool for corrupt OST. Therefore, the only possible way is to convert a OST to PST using the a right Conversion tool.

SFWare OST to PST Conversion tool comes with an interactive graphical user interface and retains the structure of original OST file after conversion. It provides an option of previewing the emails, contacts or other attributes that are recovered even before restoring.

Free Download for Windows

Converting OST file to PST file 

Before jumping on to the steps of converting OST to PST, It is important to know, why we need to convert OST to PST? Here are the reasons listed out that explain why converting of OST-file to PST-file would be the right action to take.

Why You Need to Convert Outlook OST to PST?

    • MS-Exchange server can unexpectedly crash due to power failure, malicious software, virus attacks or any other reason.
    • During Exchange Server maintenance, you will not be able to access your mailbox.
    • Converting OST file to PST file helps in transferring data from one place to another easily. Also, helps in importing data to any other system.
    • While using OST-file you may come across few errors like
    • “ Your offline folder could not be configured. \\ComputerName\FolderName\Outlook.OST.’
    • “The operation failed due to registry or installation problem”

Where, “ComputerName” is the name of the computer on which Microsoft Outlook is installed and “FolderName” is the name of the folder that has offline file.

To overcome this situation, you need to repair the OST file. As it is impossible to repair a corrupt OST file with a tool, the only best way is to convert a working Outlook OST to PST.

Step by Step Guide to Convert OST file to Outlook PST file

Download SFWare OST to PST conversion tool on your system and install the software. Launch the software either using the shortcut icon from the desktop or from the installed program menu of Windows.

Step 1: From the main screen to browse OST file by clicking either of the two options.

  • Open OST File – If you know the path where the OST file is stored
  • Find OST File – If you don’t know the location of OST fileFind OST file to convert

Step 2: In the next screen, click on Browse to choose the location for saving the converted file.
Convert OST to PST

Step 3: Select Next, and the software starts the conversion process

Step 4: After completion, a notification will be provided as OST file conversion completed.

Now, you have a PST file that includes all your Outlook data that were previously saved in OST file. By importing this PST file into your Outlook you can successfully access all your Outlook data.

Why SFWare OST to PST Conversion Tool?

Has a user friendly graphical interface that allows you to perform conversion faster and easier

Use demo version through which you can preview the emails, contacts or other attributes that are recovered even before activating a licensed version.

Comes with Self-explained options to perform OST file conversion without any difficulty

It also provides a team of highly trained technical support personnel’s who are available round the clock to assist you with your queries regarding software or conversion process.

Method 3: Move Existing OST file to a New Location by Create a New Outlook Profile

You can try moving OST file to new location by create a new profile and configuring the new location. First, locate the existing OST file and copy, paste the OST file to the new location.

    1. Launch Control Panel >> select the Mail
    2. A Mail dialog pops up >> click on the Show Profiles button >> click the Add button.
    3. Enter a new Profile name >> OK.
    4. Next, enter the credentials of your email account and create a new Outlook profile >> Next
    5. Once configuring your new email account is done, check the Change account settings checkbox and click Next.
    6. Next, go to Settings >> click on the More Settings button
    7. Go to the Advanced tab >> click on Outlook Data File Settings.
    8. Now, Browse the location where you have moved your existing Outlook Data File (OST).
    9. Select the specific file and click Open.
    10. Finally, click Finish to complete the process.

Once you have successfully configured your email profile and changed the location of the existing OST, go back to the Control panel and select Mail again.

Click on the Always use this profile radio button. From the drop-down list, select the New Profile. Click on Always use this profile. Click Apply to save the changes.


Conclusion

Outlook OST-file format comes with its own advantages and disadvantages. Most of the problems related to Offline Storage Table format in Outlook can easily be resolved by converting OST-files to PST-files. Conversion of OST to PST can be safely done using SFWare OST to PST conversion tool. With the given reasons, you now have understood why converting OST is better than changing OST-files location to a different drive.

Frequently Asked Question

Is it possible to change OST file location Outlook in 2019?

Yes, with the above-mentioned methods you can change or move the location of OST file in Outlook 2019. The same methods can be used to change the location in Outlook 2021 and other older versions.

How do you locate OST file in Outlook?

Based on the version of Windows Operating system, you can locate the OST file:

Windows 10: drive:\Users\<username>\AppData\Local\Microsoft\Outlook

Older Windows versions: drive:\Documents and Settings\<username>\Local Settings\Application Data\Microsoft\Outlook

How to Import OST file into Outlook PST format Manually?

You can make use of an Archive feature, Outlook feature that allows you to change the format of OST to PST.

  • First, Open Outlook >> go to File >> Options
  • select the Advanced option >> click on the Auto Archive Settings…
  • Set the day count to run auto-archive and you can set a count to clear old emails. Click ok
  • Now, at the specified time, Outlook will automatically create an archive of your OST emails.
  • Now you can save the files as PST file.