Know How To Fix SSD Not Showing Up On Your Computer

SSDs are rapidly gaining popularity over traditional hard drives. They are advanced, reliable and most importantly have a higher rate of data transfer that keeps the performance of the computer at peak. However, it can be very annoying if the SSD is not found or recognized. The access to data on SSD can be restricted for reasons like SSD not showing up when connected or SSD not detected.

Nevertheless, this article will guide you to fix SSD not showing up error with respect to different scenarios and regains your access to the data saved on it.

Scenarios of SSD not Showing up on Your Computer

It is strongly recommended to recover data before you proceed with any of the repairing process. It is because most of the repair process will prompt you to format the SSD and your data will be at stake.

If your SSD is new and no data is stored on the drive, you can directly follow the repair process explained in the coming sections of the article. 

Important Note: When SSD is not showing up on your computer, immediately stop using your drive until you recover data saved on it. Using a damaged or corrupt drive to save files will overwrite the existing files and permanently deletes the data saved on the drive. Before it gets too late, with the help of a safe and trusted SSD recovery software recover all your data from the drive. 

SFWare SSD recovery software is developed by testing against real-time data loss scenarios. It has a built-in robust data recovery algorithm that helps in scanning and recovering all the lost or inaccessible partitions. Also, the tool can recover more than 300 file types including FAT, NTFS and HFS partitions.

Free Download for WindowsFree Download for Mac

How to Recover Data when SSD is not Showing Up?

To recover data from the solid-state drive not being detected, download and install SFWare SSD Recovery Software and launch the application.

  • In the first step, select recover lost partition, the next screen displays all the available storage devices on the computer
  • Select the drive you want to recover and click next
  • Now, you can see all the available partitions on the drive, select the partition you want to recover and click next
  • After the completion of the scanning process, you will be able to view recovered data in either Data View or File type View
  • Select the files you want to recover and proceed to save them at your desired location

Once you have recovered your data safely from the drive, you can proceed to the next step of repairing the undetected solid-state drive.

How to Repair SSD not Showing up?

Let ‘s take up the first scenario where SSD won’t be detected in your computer:

SSD not showing up in Bios

There are four main reasons why a system BIOS will not detect the presence of an internal Solid State Drive.

  1. Unplugged data cable
  2. SATA drivers are not properly installed
  3. Drive not enabled in the BIOS
  4. Faulty solid-state drive
Unplugged Data Cable: 

The BIOS will not detect an SSD if the data cable is damaged / corrupt or the connection is incorrect. Often, SATA cables fall out of their connection when it is handled improperly. Be sure to check your SATA cables are tightly connected to the SATA port connection. You can also replace the cable with another cable to verify the fault. Now, restart your computer, If the problem still persists, then the cable wasn’t the error causing factor. 

SATA drivers are not properly installed: 

If you are using an older version of the Windows and installed a higher version of Windows, the drive may not be detected.  You might need to update the driver for your computer storage controller. Also, additional drivers need to be loaded for Windows 2000 and XP computers. 

Drive not enabled in the BIOS:

As an initial procedure to make undetected SSD partition accessible, verify that your SATA port is set to an auto-detect mode or is enabled. If you still face the same error that SSD is not showing up on your computer, try the following steps to troubleshoot the problem.

Various computers have their respective keys to access BIOS setup, for example, in most computers, you see F2 = Setup on the upper right corner during the computer boot-up process (Different manufacturers will have different methods to enter Setup, so please verify with your system documentation for specifics)

Once you are in the BIOS, go to System Setup and verify whether SSD is turned ON or OFF. If it is OFF, turn it ON and restart the computer, after following the process, your SSD should be responding. If this is not the issue you are dealing with, try performing the other solutions discussed in the article.

Faulty SSD: 

If you have successfully completed all the above-mentioned tests and procedures but still facing the same issue of SSD not being detected, this must be the indication of faulty SSD and signifies the failure of the drive. 

Few indications of faulty SSDs are frequent errors while transferring files, active applications often freeze up and crash and it works only on read mode. Fortunately, you can easily fix the SSD is read only error by clicking on the link provided. 

Lost or Unallocated SSD

Lost or Unallocated SSD is where your SSD file system is deleted or corrupted. Nevertheless, you can easily repair it through Disk Management Utility. Open Disk Management > Select SSD > Format it with new file system. 

However, formatting the drive will erase the data stored on it. If you have formatted without taking a backup of data from the SSD, do not worry! You can easily recover formatted SSD and you won’t lose any of your important data. 

You can find lost partition by opening disk management (Start > Computer management > Disk Management) and check the drive letter for SSD. If the drive is unallocated, you need to create another volume.

Right-click on the SSD drive, create a new volume and assign a drive letter. This process will locate the SSD drive and you can use it.

While performing any of the repairing process, if it happens to lose data from the partition, you can recover using an SFWare Partition Recovery Software.

Outdated Drivers

SSDs require latest updated drivers that are compatible with them to get initiated. Verify whether the drivers on your computer are compatible. If they are not compatible then update them going through the official Microsoft website.

Physically damaged or Bad Connector

If none of the above-discussed cases provide a way for your problem, it might be due to the hardware issue. Hence, interchange the data cables. Try connecting the drive to another computer and check for the error. If the SSD  still fails to show up on the computer, it could be due to physical damage. In such cases, you have to replace your SSD.

Conclusion:

SSDs are compact and have greater data transfer rates than the average magnetic disk hard drives. That also means, advanced technology also comes with compatibility issues that result in undetected or unrecognized SSD. However, it is always rewarding to keep a back-up of your important data. Even if you have forgotten to take a copy of your data,  you can easily recover the data from the drive before you repair it using SFWare SSD recovery software.

 If this article has helped you to fix the issue of SSD not showing up, please share your thoughts in the comment section below.

Leave a Reply

Your email address will not be published. Required fields are marked *